Furnaces are the most used systems during the peak of the winter season. However, an overlooked or unrepaired furnace may suddenly stop working. Nevertheless, you can follow the instructions outlined to troubleshoot your furnace. If you need assistance determining whether you need to have a professional heating repair in Orlando, FL,  contact  Van Eddies Heat & Air.

Identify The Cause

  • Check To See If Your Heating Is On: This advice might sound basic, but you might sometimes forget to switch on the system. 

  • Please Verify That The Unit Is Set To Heat Mode: Even though it is turned on, it might not sometimes be. So check whether the unit is set on the heat mode. 

  • Examine Your Furnace For Gas Leaks: Your furnace probably leaks if it smells like rotten eggs or sulfur. Mercaptan, a substance added to odorless natural gasses to signal a leak, is the source of this odor. For protection, turn off your heater, shut off the gas, call an expert at  Van Eddies Heat & Air  for heating repair in Orlando, FL, and evacuate the premises immediately.

  • Check The Heater’s Filter For Clogs: Look for obstructions. Heat cannot pass through the vents or ducts in your house if the filter is unclean.

  • Examine The Blower Motor: The blower motor in your heater provides the energy required to propel the fan and distribute warm air around your home. The motor will stop turning and producing heat if it fails due to rust, moisture, or a tripped circuit breaker.

  • Examine The Fan: The fan itself may be the source of the problem. A fan will stop moving air through the vents or ducts when it is damaged, loose, or clogged with debris.

  • Look For A Blown Fuse: Locate the fuse box to check for blown fuses and see if your heater has one. If a fuse seems foggy, discolored, or has internal metal damage, it might be blown.

  • Check The Circuit Breaker: According to heating replacement experts in Orlando, FL, a power surge or outage may have tripped your home’s main circuit breaker, forcing your thermostat to shut off.

  • Check The Pilot Light: When your heater is turned on, gas flows to the main burner, where the pilot light ignites the gas to provide heat. Your heating system will stop producing heat if your pilot light goes out.

  • Find A Broken Belt: Some HVAC systems have belt-driven motors that supply the fan with rotational energy. This belt may deteriorate quickly due to inappropriate tension, breaking, or snapping if it becomes slack due to wear and tear damage or dirt accumulation.

  • Examine The Heat Exchanger For Cracks: The air in your furnace is heated by burning gasses and oils in the heat exchanger. As the metal parts of this device expand and compress over time, stress cracks may form and wear, allowing harmful combustion gasses to leak into your home. 

There’s no need to panic if you’ve tried all of these troubleshooting techniques. During the heating season, the Van Eddies Heat & Air provides 24-hour emergency service, and all parts and labor are warranted. Call us for emergency assistance or drop us a mail to schedule an appointment for a heating replacement in Orlando, FL.